DSL 106
Differential pressure switch for air, incl. set of hoses
Application
The DSL 106 is a differential pressure switch for monitoring over pressure, differential and negative pressure of air, gaseous, non-aggressive, non-flammable media in air ducts, supply or exhaust air units. For flow monitoring in electric heating coils as well as for V-belt and filter monitoring, as air pressure deficiency protection or as limit controller.
Technical Data
| Switching capacity: | 5 (0.8) A; 12...250V AC (contact load) 4 (0.7) A, 30V DC |
| Contact: | single-pin potential-free changeover switch (changeover contact) Gold-plated multilayer contact (DDC suitable) |
| Pressure range: | see table |
| Housing: | Unterteil: Bottom part: Material PC, colour light grey (Similar to RAL 7035), cover: Material ABS, transparent mounting bracket made of sheet steel Cable gland PG11 |
| Housing temperature: | -30°...+85°C |
| Membrane: | Silicone,, LSR |
| Humidity: | < 90% r.H., non-condensing air |
| Electrical connection: | 0,14 - 1,5 mm² via screw terminals on circuit board |
| Pressure connection P1: | for higher pressure, Ø 6,2mm (Stutzen) |
| Pressure connection P2: | for lower pressure, Ø 6,2mm (Stutzen) |
| Mounting: | with metal bracket (included) |
| Connection set: | DBZ-06 included |
| Protection class: | II (according to EN 60 730) |
| Protection type: | IP 54 (according to IEC 529 |
| Functions: | Contacts 1 and 2 open at pressure/differential pressure increase to the set value. Contacts 1 and 3 close simultaneously and can be used as a signal contact. |
DSL-106
