TYCO 3PH
Three-phase thyristor controller, phase angle or oscillation package control
Application
The TYCO 3PH is a three-phase thyristor controller (max. load current 5, 15, 25, 35 or 50A) for controlling larger resistive or inductive loads. The modular compact design and the control with a continuous control signal make these power controllers the perfect actuator for industrial power control. The power section of the thyristor controller consists of two antiparallel connected thyristors, the insulated heat sink and the control electronics.
Technical Data
| Load voltage: | 1x 400V AC +/-15% (other voltages optional) |
| Power supply voltage: | 1x 230V (external) |
| Max. Rated current: | 15-50A |
| Rotating field: | self-synchronising |
| Load types: | resistive and inductive loads |
| Protective function: | Phase monitoring and monitoring of the unit temperature (red LED display: Fault and shutdown) |
| LED display: | Run (operation), Start, Run, 100% Uload, Fault (Fault) Levelling (Level) |
| Adjustment options: | Soft start-up time: 0...10 sec., with PWM control 0...5 sec. |
| Outputs: | Fault condition: Cl. 13, 14 closed; load: 2A, 230V AC, AC1; S1 relay output: Cl. 19,20 closed load: 2A, 230V AC, AC1; S2- Relay output: Cl. 16,17 closed Load: 2A, 230V AC, AC1 |
| Control type: | Phase angle (optional: Vibration package control) |
| Power loss: | 1.1W per ampere |
| Storage temperature: | -10 bis +70°C |
| Operating temperature: | 0 bis +45°C |
| Humidity: | 5% bis 95% r.H., non-condensing air |
| WxHxD: | 139 x 200 x 140 mm |
| Protection type: | IP40 (IEC 529) |
| Inputs: | 0...10V, 0...20mA, potentiometer connection (2.5...10kOhm), 10...0V inverse input (option) 5V/5...10kHz pulse width modulation input |
TYCO 3PH
