TYCO 1PH
Single-phase thyristor controller, phase angle or oscillation package control
Application
The TYCO 1PH is a single-phase thyristor controller (max. load current 5 to 50A) for controlling larger resistive or inductive loads. The modular compact design and the control with a continuous control signal make these power controllers the perfect actuator for industrial power control. The power section of the thyristor controller consists of two antiparallel connected thyristors, the insulated heat sink and the control electronics.
Technical Data
| Load voltage: | 1x 400V AC +/-15% (other voltages optional) |
| Power supply voltage: | 1x 230V (external)) |
| Max. Rated current: | 15-50A |
| Rotating field: | self-synchronising |
| Load types: | resistive and inductive loads |
| Protective function: | Overtemperature shutdown with indication of the LED: "Fault" |
| LED display: | Run (Operation), Start, 100% Uload, Fault (Fault) |
| Outputs: | Fault notification: Terminal 6, 7, load: 2A, 230V AC, AC1 |
| Power connections: | L1 and L2 Input voltage T1 and T2 Output voltage |
| Control type: | Phase angle (optional: oscillation package control) |
| Power loss: | 1,1W per ampere |
| Humidity: | 5% bis 95% r.H., non-condensing air |
| Protection class: | IP20 (IEC 529) |
| Ambient temperature: | Operation: 0...+45 °C Storage: -10°C to +70°C |
| Environment: | dry, non-conductive environment |
| Mounting: | on DIN rail system (alternative Mounting option with mounting plate) |
| Housing: | enclosed aluminium housing, anodised |
| Weight: | 1,1 kg |
| Inputs: | 0...10V, 0...20mA or potentiometer (2.5...47kOhm), switchable input- Impedance: 500 Ohm, 50kOhm |
| Dimensions WxHxD: | 92 x 128 x 105 mm |
Tyco 1PH
