MVSTG3
Magnetic vibration control unit
Application
The MVSTG3 is a control unit which is used to control solenoids vibrators. Phase angle is used to regulate the oscillation amplitude of a magnetic vibrator (MV) and thus meter the material flow from a bulk material hopper. Application for various metering tasks e.g. uniShape Bulk material feed on screening machines, slatted grids and magnetic separators.
Technical Data
| Power supply voltage: | 230-500V AC ±15%, 50Hz |
| Output current: | max. 32A |
| Control input: | 4...20mA |
| Supply voltage: | 24V DC / 50mA Operating message, |
| Electronics: | (± 24V / GND) |
| Digital output: | aktiv 24V DC / 50mA Operating message
(Short-circuit-proof) 0V output: Supply voltage for the electronics missing, no mains voltage, fuse defective, load current too low |
| Storage temperature: | -30...+70°C |
| Ambient temperature: | -20...+50°C |
| Humidity: | 5% bis 95% non-condensing air |
| Housing dimensions incl. protruding parts: | 143 x 175 x 80 mm (additional space in longitudinal direction is required to ensure sufficient ventilation) |
| Weight: | 1,2 kg |
| Protection type: | IP00 |
MVSTG3
