FSTG2 B
20-channel filter control unit
Application
The FSTG2 B is a control unit that controls the necessary cleaning process pulse to clean dust extraction systems. Up to 20 jet filters can be cleaned in turn via the pulse outputs. Only the required outputs are activated, e.g. 1 and 2 for only two jet filters. Depending on requirements, it is also possible to install a differential pressure control system as per customer specifications (adjustable via the display).
Technical Data
| Power supply voltage: | 24V DC ± 15% |
| Supply current: | 35mA bis 110mA depending on backlighting |
| Clock input: | CLK in, aktiv high, approx. 500ms - counting pulse 50...200ms Clear error |
| Ready for operation OK/Output: | OC Out, active high, short-circuit proof Monitoring of the load current of each circuit, Ready-for-operation output is switched off in case of exceedance or falling below the current limit value |
| Outputs: | 20 Open collector up to max. 3.5 A, short-circuit proof (in case of earth fault, the 5x20 mm fuse trips) |
| Storage temperature: | -30...+70°C |
| Ambient temperature: | -20...+50°C |
| Humidity: | 5% bis 95% non-condensing air |
| Housing: | Plastic, transparent cover |
| Housing dimensions incl. M16: | 180 x 200 x 78 mm plus cable clamp |
| Housing attachment: | 4 x M4x16 screws |
| Weight: | 600 gr |
| Protection type: | IP54 |
FSTG2 B
