FB6PUMP-24.RS485
Fieldbus unit for controlling pumps
Application
The FB6PUMP-24.RS485 is a Fieldbus module for setting up distributed systems in industry, building services and HVAC. This unit can be arranged in a centralised and decentralised way and controlled by a central CPU (PLC, PC) via interface RS485 and Modbus®-RTU. This module is used to control up to 6 Wilo Geniax 1.0 pumps. The pumps are electrically
controlled via the pump module, which is installed independently of the pumps but in their immediate vicinity. The control signals sent from the CPU to the pump module determine the pump speed and thus the mass flow and the heating capacity.
Technical Data
| Power supply voltage: | 24V DC ±20% |
| Power consumption: | Idle 28mA, max. current 2.2A |
| Bus protocol: | RS485, Modbus®-RTU |
| Analogue input: | 6 x water temperature, resolution 0.1 °C |
| Output analogue: | 6 x motor speed control 0...6000U/min |
| Terminals: | Plug-in terminals for supply and bus |
| Plug for pumps: | RJ12 |
| Pump connection: | Cable length <2 metres |
| Ambient temperature: | 0...+50°C |
| Accuracy: | < 0.1 % |
| EMC: | according to EN 61326 |
| Housing: | 45 mm in-line installation system |
| Dimensions WxHxD 5 TE: | 88 x 90 x 58 mm |
| Installation: | TS35 profile rail |
| Humidity: | < 95 % rH, non-condensing air |
| Protection type: | IP20 |
| Standards: | CE conformity |
