Module 2020 Expansion modules
E…
The modular I/O system from EAP consists of a base module with LCD and 4 buttons with Modbus®-RTU or Ethernet Modbus®TCP-IP, which can control up to 15 expansion modules (various digital and analogue I/Os).
Expansion modules
| E16DI | E16XI | E8XI.4AO-U | E8XI.4AO-U/H |
| E8DI.4DO-R | E8DI.4DO-R/H | E16N-PTC | E4DO-R |
| E4DO-R/H | E8DO-R | E8DO-R/H | E6DO-W |
| E6DO-W/H | E8DO-OC | E8DO-OC/H | E8DO-OCP |
| E8DO-OCP/H | E16DO-OC | E8DO-TR | E8DO-TR/H |
| E8DO-HL | E4AI-I.4AO-I | E4AI-I.4AO-I/H | E8AO-U |
| E8AO-U/H | E4DI.4XI.2AO-U.2DO-R | E4DI.4XI.2AO-U.2DO-R/H | E3PWR Energy Meter |
Technical Data
| digital input: | 24V, 5 mA (pnp or npn) incl. counting function up to 100 Hz and toggle register |
| analogue input: | PT100/1000; MB: -100...+500°C, NI1000, NI1000 TK5000, KTY81-110, KTY81-211, Resolution 0,1°C and resistance up to 6553,5 Ohm NTC1.8kOhm, NTC5kOhm, NTC10kOhm, NTC20kOhm, resistance up to 6.5 MOhm, 0-10V resolution 1mV, 4-20m resolution 1µA |
| Digital output: | |
| Open Collector npn: | 1-36V DC npn / 1 A, short-circuit proof E8OC - max. frequency 1kHz - 0,1% resolution E16OC - max. frequency 250Hz - 1% resolution |
| Open Collector pnp: | 6-36V DC pnp (incl. tolerances) / 1,1 A / 8 channels on, short-time 2,5 A, short-circuit proof. thermally protected 2,2 A / if only 1 channel / connector is active, parallel connection allowed, current acculates accordingly |
| Digital output TR(triac): | 0-230V AC / 50 / 60 Hz / 0,7 A / 8 Channels on, inrush current 50 A / 20 ms, 4 A / 5 sec pulse package control with zero passage circuit, not short-circuit and overload-proof |
| Digital output | |
| Normally open relay: | 230V AC / 5 A resistive load, 0,5 A cos phi 0,4 230V AC / 16 A resistive load, 0,7 A cos phi 0,4 |
| Changeover contacct relay: | 230V AC / 5 A resistive load 230V AC / 0,5 A cos phi 0,4, HL 55V DC / 10 A AC1 resistive load |
| Output analogue: | 0...10V (unit 1mV), 4...20mA (unit 1µA) |
| Expansion module housing: | 45 mm in-line syst. WxHxD: 52,5x90x58mm |
| Status display: | DI/DO Dual LED red/green, Mode LED green |
| Hand control level: | control of the outputs via toggle switch and potentiometer |
| Terminals depending on module: | Plug-in terminals with push-in connection up to 1,5 mm² or 2,5 mm² |
| Installation: | TS35 profile rail |
| Ambient temperature: | 0...+50°C |
| Accuracy at 20-30°C: | typically T 01°C, U 0,1%, I 0,2% Resolution 0,1°C, 1 mV, 1µA |
| EMC: | according to EN 61326 |
| Protection type: | IP20 |
| Standards: | CE conformity |
combination example
B02 + E8DO-R + E6DO-W/H
