BSK-Modul
Fieldbus unit for controlling fire dampers, housing IP54
Application
The FB4DI.2DO-R is a Fieldbus module for setting up distributed systems (Fieldbus systems) in industry, building services and HVAC. These units are arranged in a decentralised way and read and written by a central CPU (PLC, PC) via interface RS485 and Modbus®-RTU. This module is used to control fire dampers.
Technical Data
| Power supply voltage: | 24V DC +30/-10% or 230V AC ±10% |
| max. current draw 24V DC | Relay off 5mA Relay on 14mA (at 28V approx. 12mA, at 20V approx. 16mA) 230VAC: Relay off 1.2W, relay on 1.5W |
| Bus protocol: | RS485, Modbus®-RTU |
| Digital input: | 24V DC (npn) |
| Digital output: | 230V AC / 5A AC1 resistive load 230V AC / 0.5 A cos phi 0.4 (24V AC or 24V DC 5A resistive load only possible with 24V DC type) |
| Ambient temperature: | 0...+50°C |
| Accuracy: | < 0.1 % |
| EMC: | according to EN 61326 |
| Terminals: | Bus and inputs double push-in 1,5mm² Outputs and 230V supply push-in up to 2.5mm² |
| Housing: | Plastic, light grey |
| Dimensions WxHxD: | 125 x 115 x 58 mm (FB8DI: 176 x 126 x 58mm) |
| Installation: | Wall-mounting |
| Cable gland: | 6 x M16, 2 x M20 with strain relief (FB8DI: 10 x M16 + 2 x M20 with strain relief) |
| Humidity: | < 95 % rH, non-condensing air |
| Protection type: | IP54 |
| Standards: | CE conformity |
Custom designs on request!
FB4DI.2DO-R – open
FB4DI.2DO-R 24V
with Belimo plug
with strain relief (and
dummy plates)
